Talk less do more

Semakin banyak anda belajar, maka anda akan merasa semakin bodoh !!!

Install DHCP Server

<!– @page { size: 21cm 29.7cm; margin: 2cm } P { margin-bottom: 0.21cm } –>

  • Install dhcp3-server dengan perintah :

imron@debian:/# apt-get install dhcp3-server

masukkan cd sesuai yang diminta,

  • Konfigurasi file dhcpd.conf,

  • Masuk pada direktori cd /etc/dhcp3,

imron@debian:/# pico dhcp.conf

  • Edit file dhcp.conf seperti konfigurasi dibawah ini yang bercetak tebal :

#

# Sample configuration file for ISC dhcpd for Debian

#

# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $

#

# The ddns-updates-style parameter controls whether or not the server will

# attempt to do a DNS update when a lease is confirmed. We default to the

# behavior of the version 2 packages (‘none’, since DHCP v2 didn’t

# have support for DDNS.)

ddns-update-style none;

# option definitions common to all supported networks…

option domain-name imron17.com “;

option domain-name-servers imron17.com, 208.67.222.222;

default-lease-time 600;

max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local

# network, the authoritative directive should be uncommented.

#authoritative;

# Use this to send dhcp log messages to a different log file (you also

# have to hack syslog.conf to complete the redirection).

log-facility local7;

# No service will be given on this subnet, but declaring it helps the

# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {

#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {

# range 10.254.239.10 10.254.239.20;

# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;

#}

# This declaration allows BOOTP clients to get dynamic addresses,

# which we don’t really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {

# range dynamic-bootp 10.254.239.40 10.254.239.60;

# option broadcast-address 10.254.239.31;

# option routers rtr-239-32-1.example.org;

#}

# A slightly different configuration for an internal subnet.

subnet 192.168.17.0 netmask 255.255.255.0 {

range 192.168.17.2 192.168.17.254;

# option domain-name-servers imron17.com;

# option domain-name ” imron17.com “;

option routers 192.168.17.1;

option broadcast-address 192.168.17.255;

default-lease-time 600;

max-lease-time 7200;

}

# Hosts which require special configuration options can be listed in

# host statements. If no address is specified, the address will be

# allocated dynamically (if possible), but the host-specific information

# will still come from the host declaration.

#host passacaglia {

# hardware ethernet 0:0:c0:5d:bd:95;

# filename “vmunix.passacaglia”;

# server-name “toccata.fugue.com”;

#}

# Fixed IP addresses can also be specified for hosts. These addresses

# should not also be listed as being available for dynamic assignment.

# Hosts for which fixed IP addresses have been specified can boot using

# BOOTP or DHCP. Hosts for which no fixed address is specified can only

# be booted with DHCP, unless there is an address range on the subnet

# to which a BOOTP client is connected which has the dynamic-bootp flag

# set.

#host fantasia {

# hardware ethernet 08:00:07:26:c0:a5;

# fixed-address fantasia.fugue.com;

#}

# You can declare a class of clients and then do address allocation

# based on that. The example below shows a case where all clients

# in a certain class get addresses on the 10.17.224/24 subnet, and all

# other clients get addresses on the 10.0.29/24 subnet.

#class “foo” {

# match if substring (option vendor-class-identifier, 0, 4) = “SUNW”;

#}

#shared-network 224-29 {

# subnet 10.17.224.0 netmask 255.255.255.0 {

# option routers rtr-224.example.org;

# }

# subnet 10.0.29.0 netmask 255.255.255.0 {

# option routers rtr-29.example.org;

# }

# pool {

# allow members of “foo”;

# range 10.17.224.10 10.17.224.250;

# }

# pool {

# deny members of “foo”;

# range 10.0.29.10 10.0.29.230;

# }

#}

  • Simpan konfigurasi tersebut.

  • Restart dhcp3-server:

imron@debian:/# /etc/init.d/dhcp3-server restart

  • Jika tidak keluar failed, maka dhcp3-server sudah berhasil

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Masukkan alamat email Anda untuk mengikuti blog ini dan menerima pemberitahuan tentang tulisan baru melalui email anda.

Join 19 other followers

%d bloggers like this: